Potable Water Rubber Sheeting

Zenith Rubber manufactures Potable water rubber sheet which is specifically designed and approved for use in contact with Potable (drinkable) water. Zenith Rubber Potable Water EPDM is independently tested and certified by the Australian Water Quality Centre, it meets AS/NZS 4020:2018, United Kingdom Standard Water regulation Approval Scheme ( WRAS), it meets BS 6920-1: 2000 & 2014 and German potable water standard KTW.

Zenith Rubber Potable water rubber sheet is a high performance and low specific gravity EPDM rubber compound which can be applied for water fitting (supplying) parts e.g., lining, joining, gaskets, membranes, cisterns, O-rings, washers in Pipes, tanks, Ponds, and other variety of water application.

Product Dimension

Potable Rubber Sheet
Code Colour Specific Gravity Hardness (±5) Tensile Strength Elongation at break Compression Set at 70°C for 22 hrs Temp. Range TDS
Gm/cm3 Shore A (min) kg / cm2 % (min) % °C
EP70115 Black/Blue 1.13 70 115 300 20 -30 to +130
Standard Length 10 Mtr 33 Ft 11 Yard
Standard Width 1.2/1.4/1.5/2 Mtr 4/4.6/4.92/6.56 Ft 1.33/1.53/1.64/2.18 Yard

Note

  1. One side or both side smooth or fabric finish can be supplied.
  2. Specifications are subject to change without notice.
Back