Abra-Trile Sheeting

Abra-Trile is the ideal lining material for applications which require oil, chemical and Abrasion resistance. While natural rubber boasted good abrasion resistance, it fell short in oil immersion applications. Meanwhile, typical nitrile-based rubbers excelled in oil resistance but lacked wear performance, limiting their use in high abrasion settings.

Enter Abra-Trile rubber, a specially formulated nitrile-based compound designed to deliver exceptional abrasion resistance even in the presence of oils and chemicals. Notably, Abra-Trile rubber also exhibits outstanding high-temperature performance, making it suitable for use up to 110°C (230°F).

Product Dimension

Features Resistance to oils, minerals, chemicals, greases, Abrasion, aliphatic hydrocarbons, Low permeability to gases
Applications Grain handling systems, linings in fertilizer works, pump linings and impellers,sand processing circuits where oil-based reagents are used.
Finish Type Both side smooth, one side smooth and other side fabric or buffed finish / CN Bonding.
Standard Thickness 1 mm to 50 mm
Standard Length 10 Mtr, 33 Ft, 11 Yard
Standard Width 1.2 / 1.4 / 1.5 / 2 Mtr, 48" / 54" / 60" / 79" inches
Technical Specification
Code Colour Specific Gravity Hardness (±5) Tensile Strength Elongation Polymer Abras. TDS
Gm/cm3 SHORE A Kg/cm2(min) % (min) mm3
Abra-Trile 55 Orange 1.1 55 ± 5 130 700 Nitrile 160 -170
Abra-Trile 70 Orange 1.1 70 ± 5 130 700 Nitrile 160 -170

Note

  1. Custom width and length is available on request
  2. Custom colours available on request
Back